Rated primary current |
100 A AC |
Output voltage |
1 mV AC/A |
Amplitude accuracy |
¡¾0.3% rdg.¡¾0.02%f.s. (f.s.:100 A (9695-03),45Hz to 66Hz,
at core center) |
Phase accuracy |
Within ¡¾1¡Æ (45 Hz to 5 kHz) |
Amplitude frequency characteristics |
Within ¡¾1% at 40 Hz to 5 kHz (deviation from
accuracy) |
Effect of conductor position |
Within ¡¾0.5% (deviation from center) |
Effect of external electromagnetic field |
0.1 A equivalent or lower (in an AC electromagnetic field
of 400 A/m) |
Maximum permissible input |
130 A continuous (9695-03)(at 45 to 66 Hz, ambient
temperature 50¡ÆC) |
Temperature coefficient |
0.02%rdg./¡ÆC |
Dielectric strength |
3536 V ACrms for 15 sec (between electric circuit and
core) |
Maximum rated voltage to earth |
300 V ACrms or lower (Insulated conductor) |
Operating Temperature & Humidity |
0 to 50¡ÆC (32 to 122¡ÆF), 80%RH or lower
(non-condensating) |
Storage Temperature & Humidity |
-10 to 60¡ÆC(14 to 140¡ÆF), 80%RH or lower
(non-condensating) |
Operating Environment |
Indoors, up to 2000 m (6562-ft.) ASL |
Standards applying |
Safety EN61010-2-032:2002 Type B current
sensor Measurement Category III, Pollution Degree 2 (Anticipated Transient
Overvoltage: 4000 V) EMC EN61326:1997+A1:1998+A2:2001+A3:2003
|
Measurable conductor diameter |
15 mm (0.59¡±) or less |
Output terminals |
M3 terminal (Maximum outside diameter: 6.5 mm/0.26¡±,
inside diameter: 3.2 mm/0.13¡±) |
Cable length |
3 m or less |
Dimensions |
Approx. 50.5W x 58.0H x 18.7D mm (1.99¡±W x 2.28¡±H x
0.74¡±D) (excluding protrusions) |
Mass |
Approx. 50 g (1.8 oz.) |
Accessory |
Instruction Manual |
Option |
9219 CONNECTION CABLE, 9238 CLAMP SENSOR CABLE |