|
¢Ñ ÇöÀçÀ§Ä¡ : HOME ¡·
°íÀå/¼ö¸®ºÎǰ ¡·Áß°í°èÃø±â ǰÀý¸ñ·Ï ¡·HP,Agilent/Philips,Fluke[48]
|
|
 |
|
¢Â Fluke Documenting Process Calibrator |
|
|
|
|
|
|
|
|
|
 |
|
|
|
Á¦¸ñ ¾øÀ½
Measurement Accuracy |
Voltage DC |
110.000 mV |
0.025%+0.015% * |
1.10000 V |
0.025%+0.005% * |
11.0000 V |
0.025%+0.005% * |
110.000 V |
0.05%+0.005% * |
300.00 V |
0.05%+0.005% * | |
Voltage AC |
20 to 40 Hz |
2% + 10 |
40 to 500 Hz |
0.5% + 5 |
500 to 1 kHz |
2% + 10 |
1 kHz to 5 kHz |
10% + 20 |
Ranges: |
1.1000, 11.000, 110.00,
300V | |
Current DC |
30.000 mA |
0.01% + 0.015% * |
110.00 mA |
0.01% + 0.015% * | |
Resistance |
11.000 ¥Ø |
0.05% + 50 m¥Ø |
110.00 ¥Ø |
0.05% + 50 m¥Ø |
1.1000 k¥Ø |
0.05% + 500 m¥Ø |
11.000 k¥Ø |
0.1% + 10 ¥Ø | |
Frequency |
1.00 to 109.99 Hz |
0.05 Hz |
110.0 to 1099.9 Hz |
0.5 Hz |
1.100 to 10.999 kHz |
5 Hz |
11.00 to 50.00 kHz |
50 Hz | |
Pressure |
Accuracy |
from 0.025% of range using any of 29 pressure
modules. |
|
(for detailed specifications refer to pressure modules in
options and accessories) |
|
Modules available for differential, gage, vacuum,
absolute, dual and high pressure. | |
Note |
* |
(% of reading + % of full
scale) | |
Source Accuracy |
Voltage DC |
110.000 mV |
0.01%+0.005% * |
1.10000 V |
0.01%+0.005% * |
15.0000 V |
0.01%+0.005% * | |
Current DC |
22.000 mA (Source) |
0.01%+ 0.015% * |
22.000 mA (Simulate) |
0.02% + 0.03% * | |
Resistance |
11.000 ¥Ø |
0.01% + 20 m¥Ø |
110.00 ¥Ø |
0.01% + 40 m¥Ø |
1.1000 k¥Ø |
0.02% + 500 m¥Ø |
11.000 k¥Ø |
0.03% + 5¥Ø | |
Frequency |
0.00 to 10.99 Hz |
0.01 Hz |
11.00 to 109.99 Hz |
0.1 Hz |
110.0 to 1099.9 Hz |
0.1 Hz |
1100 to 21999 Hz |
2 Hz |
22.000 to 50.000 kHz |
5 Hz | |
Note |
* |
(% of reading + % of full
scale) | |
RTDs and Thermocouples |
Measure Accuracy: |
10 ¥Ø Cu (427): |
2 ¡ÆC |
100 ¥Ø Pt (3916): |
0.3 ¡ÆC |
100 ¥Ø Pt (3926): |
0.3 ¡ÆC |
100 ¥Ø Pt (385): |
0.3 ¡ÆC |
200 ¥Ø Pt (385): |
0.3 ¡ÆC |
500 ¥Ø Pt (385): |
0.3 ¡ÆC |
1000 ¥Ø Pt (385): |
0.3 ¡ÆC |
120 ¥Ø Ni (672): |
0.3 ¡ÆC |
note: |
For 2-and 3-wire measurement, add 0.4 ¡ÆC |
E: |
0.3 ¡ÆC |
N: |
0.5 ¡ÆC |
J: |
0.3 ¡ÆC |
L: |
0.3 ¡ÆC |
K: |
0.3 ¡ÆC |
T: |
0.3 ¡ÆC |
U: |
0.3 ¡ÆC |
B: |
0.9 ¡ÆC |
R: |
1.0 ¡ÆC |
S: |
0.9 ¡ÆC |
C: |
0.6 ¡ÆC |
note: |
Accuracy with external cold junction, for internal
junction add 0.2 ¡ÆC | |
Source Accuracy: |
10 ¥Ø Cu (427): |
1 ¡ÆC |
100 ¥Ø Pt (3916): |
0.1¡ÆC |
100 ¥Ø Pt (3926): |
0.1¡ÆC |
100 ¥Ø Pt (385): |
0.1¡ÆC |
200 ¥Ø Pt (385): |
0.1¡ÆC |
500 ¥Ø Pt (385): |
0.1¡ÆC |
1000 ¥Ø Pt (385): |
0.1¡ÆC |
120 ¥Ø Ni (672): |
0.1¡ÆC |
note: |
For 2-and 3-wire simulation, add 0.4 ¡ÆC |
E: |
0.2 ¡ÆC |
N: |
0.3 ¡ÆC |
J: |
0.2 ¡ÆC |
L: |
0.2 ¡ÆC |
K: |
0.3 ¡ÆC |
T: |
0.3 ¡ÆC |
U: |
0.3 ¡ÆC |
B: |
0.8 ¡ÆC |
R: |
0.9 ¡ÆC |
S: |
0.9 ¡ÆC |
C: |
0.6 ¡ÆC |
note: |
Accuracy with external cold junction, for internal
junction add 0.2 ¡ÆC | |
Specifications |
Data Log Functions |
Measure functions: |
Voltage, current, resistance, frequency, temperature,
pressure |
Reading rate: |
1, 2, 5, 10, 20, 30, or 60 readings/minute |
Maximum record length: |
8000 readings (7980 for 30 or 60
readings/minute) | |
Ramp Functions |
Source functions: |
Voltage, current, resistance, frequency,
temperature |
Rate: |
4 steps/second |
Trip detect: |
Continuity or voltage (continuity detection not available
when sourcing current) | |
Loop Power Function |
Voltage: |
Selectable, 24 V or 28 V |
Accuracy: |
5% |
Maximum current: |
22 mA, short circuit protected |
Maximum input voltage: |
30 V DC | |
Step Functions |
Source Functions |
Voltage, current, resistance, frequency,
temperature |
Manual Step |
Selectable step, change with arrow buttons |
Autostep |
Fully programmable for function, start delay, stepvalue,
time per step, repeat | |
Environmental Specifications |
Operating temperature |
|
-10¡ÆC to +50¡ÆC |
|
-20¡ÆC to +50¡ÆC * | |
Storage temperature |
|
Dust/water resistance |
|
Operating Altitude |
|
Note |
* |
Except frequency and
AC | |
Safety Specifications |
Agency Approvals |
|
CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111,
and EN610-1:1993 | |
Mechanical & General
Specifications |
Size |
|
Weight |
|
Batteries |
|
Battery life |
|
Battery Replacement |
|
Via snap-shut door without opening calibrator; no tools
required | |
Side port connections |
|
Pressure module connector |
|
RS-232 connector for PC interface cable |
|
Connection for optional battery eliminator
| |
Data storage capacity |
|
1 week of calibration
results | |
90 day specifications |
|
The standard specification intervals for the 743B is 1
and 2 years. |
|
Typical 90 day measurement and source accuracy can be
estimated by |
|
dividing the one year "% of reading" or "%of output"
specifications by 2. |
|
Floor specifications, expressed as "% of full scale"
or |
|
"counts" or "ohms" remain constant. | |
ÃæÀü¿ë¼¼Æ®º°µµ 15¸¸¿ø |
|
|
|
|
|
|