|
Á¦¸ñ ¾øÀ½
Documenting Process Calibrator
The Fluke 702 Process Calibrator is an easy-to-use field
calibrators designed specifically for use on control instrumentation in process
plants. Rugged packaging allows the calibrator to perform dependably despite
rough handling and hostile plant environments, while automatic documentation
capabilities save time and ensure accurate results. Because the 702 is a
multipurpose tool, you can use them for troubleshooting and maintenance as well
as calibration.
Fluke 702 Features:
- Calibrate temperature, pressure, voltage, current,
resistance, and frequency
- Simultaneously measure and source
- Automatically capture calibration results
- Document procedures and results to meet ISO 9000, EPA, FDA,
OSHA and other requirements
- Measure/simulate eleven types of thermocouples and eight
RTDs
- Store up to 8,000 readings in data logging mode
- PC interface
- Weight: 3 lb 1 oz
- Internal Battery Pack: NiCd, 7.2V, 1700 mAh
- Battery Life: Typically over eight hours
Fluke 702 Specifications:
Measure Range (full scale) |
110.000 mVdc - 300.00Vdc; Vac, 20 Hz to 5 kHz;
30.00 mA dc - 110.00 mA dc; 11.000¥Ø - 11.000 k¥Ø; 1.00 Hz to 50.00 kHz |
Source Range (full scale) |
110.000 mV; 1.10000V; 11.00000V; Source 22.000 mA; Simulate
22.000 mA; 11.000¥Ø - 11.000 k¥Ø; 2.00 Hz to 50 kHz |
Temperature, RTDs and Thermocouples |
10¥Ø Cu(427); 100¥Ø Pt(3916); 100¥Ø Pt(3926); 100¥Ø (385); 200¥Ø
Pt(385); 500¥Ø Pt(385); 1000¥Ø Pt(385); 120¥Ø Ni(672); E, N, J, L, K, T, U, B, R,
S, C |
Data Log |
measure V, mA, ohms, frequency, temperature, pressure 1 to 60
readings/min, 8000 readings max |
Ramp |
source V, mA, ohms, frequency, temperature 4
steps/sec |
Loop Power |
selectable, 24V or 28V; 22 mA max | PDFÆÄÀϺ¸±â
|